![]() ![]() ![]() Sometimes when moving a line so that it is coincident with another line, the moved line would be deleted leaving a gap in the other line, resulting in the net to become unrouted.Board Cutouts are now handled better by copper pours during plowing.This has also been corrected for Print Colors. Pressing Defaults in the Colors tab of the Options Display dialog will now set all the layers' colors to the default, not just the visible ones.In cases where unconnected net traces are very close, but not actually physically touching, Unrouted Nets DRC in P-CAD PCB was not detecting the unrouted condition.Arc's in Board Outlines and in Board Cutouts would, under certain conditions, be turned into straight lines.A similar problem occurred if the user sub-selected several single-layer objects and extend-selected the component pattern itself, and then performed the drag. When a pattern contains embedded multi-layer objects (keepouts, glue dots, or pick points), these objects would not follow the pattern geometry correctly when the component pattern was selected and dragged.When a drill table is automatically updated to coincide with new hole data, its user-defined fields now remain in the same row as the hole size in which they were originally defined. When a drill table is placed on the board containing text in user-defined columns, and then an editing operation causes drill table rows to become added or deleted, user-defined fields often stray from their originally associated rows / hole sizes.Increased the number of shortcuts allowed for Layer Sets from 10 to 20.While moving a polygon, copper pour, polygon cutout, or polygon keepout, if ESC or the right mouse button was pressed to cancel the move, and a subsequent move was tried on the polygon object, a would appear.Copper Pours will once again correctly pour in either Selected Order or Smallest to Largest Order.Also included a setting in the General tab of Options✼onfigure called "Max Node for Show/Hide" inside the Connection Options group that allows for ignoring nets with node counts greater than specified. Two new features have been added to the right-mouse menu - Show Attached Connections and Hide Attached Connections. Added an option for Max Node for Show/Hide Connections The buttons, Move Up and Move Down, provide the ability to reorganize the list of grids by shifting the selected grid in the chosen direction. Options»Grids has been enhanced with two new buttons. If more than one copper pour is selected the pour sequence obeys the Pour/Repour Option in the General tab of the Options Configure dialog. The Unpour command clears the fill for the copper pour. With the Pour command you can pour an unfilled copper pour, or repour a filled copper pour. Two new commands have been added to the copper pour's right-mouse menu – Pour/Repour and Unpour. These options behave identically to the options that appear on the Edit»Unroute menu. When the currently selected objects in P-CAD PCB includes at least one net object, the right-mouse popup menu now conveniently presents several Unroute options. Unroute commands added to right-mouse menu The Display Origin Marker enables the display of a marker that is displayed on the workspace at the location of the relative origin. All offsets override the "Use Relative Origin" setting. NOTE: any reports or exports, such as Gerber that have explicitly set offsets will use those offsets instead of the relative origin. Also all reports, including DRC and all exports will use the relative origin while in "Use Relative Origin" mode. Updating coordinates while in "Use Relative Origin" mode will be based on the relative origin. With Use Relative Origin checked, all properties dialogs will display coordinates based on the relative origin. Once "Use Relative Origin" has been set then whenever the Relative Origin has been set in the Options»Grids dialog box, all pertinent dialogs, reports, and exports will utilize the relative origin. ![]() They are "Use Relative Origin" and "Display Origin Marker". ![]() Two new settings have been added to Options✼onfigure»General. NOTE: For any report that specifies coordinates, if you produce a report and then change the relative origin those reports will no longer be in sync with origin. P-CAD PCB has been enhanced to reflect use the relative origin in all object properties dialog, all pertinent reports and export, such as Gerber and NC Drill. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |